Note: 1. When the nominal displacement of "4", "6" and "8" pumps is used, the speed should exceed 1450r/min when the pressure exceeds 16MPa.
2. When using a large displacement single pump and the corresponding double pump at high speed, the negative pressure of the suction inlet should be reduced.
3. The values in parentheses are those used with phosphate and aqueous hydraulic fluids.
4. For occasions with special requirements for low noise, it is recommended to use 1000r/min for working speed.
5. When the working liquid is phosphate solution, due to the need to use special seals (fluoroelastomer), please add [-] before the specified model when ordering. 6. The driving power is under the working condition of P=16MPa, n=1500r'min,
